Pocket Dissolved oxygen tester LPKDO-A10

Overview

Pocket Dissolved oxygen tester LPKDO-A10 is equipped with polarographic sensor to measure dissolved oxygen content. The system menu of dissolved oxygen meter can set 6 parameters which includes the number of calibration points, temperature units etc. It can measure the dissolved oxygen content present in water, waste water, other liquids & solutions.

Specifications :

Dissolved oxygen range	0.0 to 20.0 mg/L (or ppm)
Dissolved oxygen accuracy	± 0.5 mg/L
% of saturation of oxygen	0.0 to 200.0%
Sensor type	Polarographic dissolved oxygen probe
% Saturation of oxygen accuracy	± 10 % F.S.
Temperature compensation range	0 °C to 40 °C, 32 °F to 104 °F
Barometric pressure correction	60.0 to 112.5 kPa, 450 to 850 mmHg
Salinity correction	0 - 35 g/L
Data hold function	Manual or automatic
Power off	Manual or automatic (8 minute after last key is pressed)
Reset function	Yes
Connector	6 pin mini plug
Battery life	Approximately 150 hours
Dimension (L × Dia.)	175 × 40 mm
Weight	100 g

Features :

• -  Equipped with polarographic sensor
• -  1 - 2 points calibration using air saturated water & zero oxygen solution
• -  Manual salinity & barometric pressure compensation for better measurement of dissolved oxygen
• -  System menu allows setting the 6 parameters
• -  Automatic temperature compensation for accurate measured value over the entire range
• -  Auto hold function freezes stable, final readings for better viewing and recording
• -  Automatic power off helps to reduce battery power consumption
• -  Waterproof features guarantees protection against harsh conditions
• -  Battery indicator to show the remaining battery capacity
• -  Reset function automatically resumes all the settings to default mode

Applications :

Pocket Dissolved oxygen tester has applications in water & waste water management industry, aquarium, surface ground water, etc. to detect content of dissolved oxygen.

Standard Accessories :

Dissolved oxygen probe
Dissolved oxygen Electrolyte solution
Membrane cap
AAA batteries
Carrying case

Optional Accessories :

Polarographic sensor
30 ml electrolyte solution per bottle
Membrane cap