info@labtron.us
Labtron
Request Quote
Amino Acid Analyzer
Tube Furnace
Oven Incubator
Flame Photometer
TOC Analyzer
Lab Refrigerator-Freezer Combination
IR Carbon Sulphur Analyzer
Sample Concentrator
Nucleic Acid Purification System
Oil And Grease Analyzer
V-shell Blender
Differential Thermal Analyzers
Blood Collection Monitor
Density Meter
Biochemistry Analyzer
Automatic Glassware Washer
Stomacher
Hybridization Oven
Flammability Tester
Pathology Workstation
BLOOD THAW MACHINE
Opacity Meter
Plasma Extractor
Plate Sealer
Dosimeter
Stroboscope
Latex Stability Tester
Wind Meter (Anemometer)
Slide Dryer
Paraffin Trimmer
Vacuum Spin Coater
Osmometer
ESR Analyzer
Differential Scanning Calorimeters
Water Purifier
Dehumidifier
Vacuum Pycnometer
Gene Electroporator
Laminar Flow Canopy
Fume Extractor
Gel Strength Test System
Bottle Top Dispenser
Tachometer
Microwave Digestion System
Fluorometer
UV Analyzer (ID 600)
Air Shower (ID 602)
Semi-automatic Bio-chemistry Analyzer
Soxhlet Apparatus
Color Assessment Cabinet
Leather Softness Tester
Washer Disinfector
Glassware Drying Cabinet
Metal Detector
Alloy Analyzer
Blood Bag Tube Sealer
Handheld Homogenizer
Laser Theodolite
UV Air Sterilizer

Petroleum Testing

Automatic Bomb Calorimeter : Automatic Bomb Calorimeter LABC-A10

Automatic Bomb Calorimeter LABC-A10
  • Calorimeter type : Isoperibol
  • Temperature range : 5 to 40°C
  • Measurement range : 5 to 40 MJ/ kg
  • Operation Mode : The outer barrel temperature is constant
  • Temperature resolution : 0.0001°C
Automatic Bomb Calorimeter : Automatic Bomb Calorimeter LABC-A11

Automatic Bomb Calorimeter LABC-A11
  • Calorimeter type : Isoperibol
  • Temperature range : 5 to 40°C
  • Measurement range : 5 to 40 MJ/ kg
  • Operation Mode : A. Outer barrel temperature follows room temperature change mode Or B. Outer barrel temperature constant mode
  • Temperature resolution : 0.0001°C
Automatic Bomb Calorimeter : Automatic Bomb Calorimeter LABC-B10
Automatic Bomb Calorimeter LABC-B10
  • Calorimeter type : Isoperibol
  • Oxygen filling : Fully automatic oxygen filling & releasing, fully automatic bomb raising & lowering
  • Bomb volume : 250 ml
  • Analysis time : < 8 min full test process: <10 min
  • Bomb washing : Manual
Automatic Bomb Calorimeter : Automatic Bomb Calorimeter LABC-B11
Automatic Bomb Calorimeter LABC-B11
  • Calorimeter type : Isoperibol
  • Oxygen filling : Semi-automatic
  • Bomb volume : 282 ml
  • Analysis time : 15 to 25 min
  • Bomb washing : Manual
Octane Number & Cetane Number Tester : Octane Number and Cetane Number Tester LOCT-A10

Octane Number and Cetane Number Tester LOCT-A10
  •  Measuring Range For Aviation Gasoline : 86.0 to 105.0/MON
  •  Measuring Range For Gasoline For Motor Vehicles : National standard: 65.0 to 110.0/RON<br/> National-V standard: 70 to 115.0/RON<br/> Blended gasoline: 75.0 to 120.0/RON<br/> Light gasoline: 50.0 to 85.0 /MON<br/> Isomerized gasoline: 85.0 to 120.0/RON<br/> Arene gasoline: 90.0 to 120.0/RON
  •  Measuring Range For Ethanol : E93: 92.0 to 95.0/RON<br/> E97: 95.0 to 99.0/RON<br/> Judgement: 60.0 to 120.0/RON
  • Measuring Range For Automobile Diesel Fuels : Cetane number: 25 to 75/CN<br/> Cetane index: 20 to 80/CI
  • Measuring Accuracy : Aviation gasoline: ≤ ± 1.5/MON<br/> Gasoline for motor vehicles: ≤ ± 1.5/RON, ≤ ± 1.5/MO<br/> Automobile diesel fuels: ≤ ± 2.6/CN, ≤ ± 2.6/CI<br/> Regression sample retest: ≤ ± 0.5/RON, ≤ ± 0.5/MON<br/> Regression sample measurement: ≤ ± 1.5/RON, ≤ ± 1.5/MON<br/> Calibration accuracy: ≤ ± 0.2/RON, ≤ ± 0.2/MON
Octane Number & Cetane Number Tester : Portable Octane Number and Cetane Meter LOCT-A20

Portable Octane Number and Cetane Meter LOCT-A20
  • Measurement item : motor gasoline and diesel
  • measurement unit of octane is ON : 40 to 120
  • Permissible error of octane : ± 0.5 max
  • Fluctuate range of octane : ± 0.2 max
  • measurement unit of cetane is CN : 20 to 100
Acid and Alkali Tester : Acid Number and Acidity Tester LAAT-A11
Acid Number and Acidity Tester LAAT-A11
  • Ambient temperature : ≤ 35 °C
  • Relative humidity : ≤ 85 %
  • Precision of titration tube : Scale division is 0.02 ml
  • Total power consumption : ≤ 1200 W
  • Power supply : AC 220 V ± 10 %, 50 Hz
Acid and Alkali Tester : Acid Number Tester LAAT-A12
Acid Number Tester LAAT-A12
  • Measurement range : ≥0.05 mg KOH/g
  • Potential measurement range : 0 to 1800.0 mV
  • Burette volume : 10 mL
  • Minimum titration volume : 0.001 ml
  • Burette precision : ±0.1 %FS
Acid and Alkali Tester : Base Number Tester LAAT-A13

Base Number Tester LAAT-A13
  • Volumetric analysis : Titration condensation: 0.1 N;<br> Controlling accuracy: ≤ ± 0.02 ml
  • Automatic acid titration : Titration condensation: 0.1 N;<br> Controlling accuracy: ≤ ± 0.1 pH
  • Automatic potential control : Titration condensation: 0.1 N;<br> Controlling accuracy: ≤ 10 mV
  • Ambient temperature : 0 ~ 35 ℃
  • Relative humidity : ≤ 85 %
Acid and Alkali Tester : Water Soluble Acid and Alkali Tester LAAT-A10

Water Soluble Acid and Alkali Tester LAAT-A10
  • Graduated flask : 100 ml，50 ml
  • Conical flask : 100ml
  • Separatory funnel : 250ml
  • Ambient temperature : (-10 )°C to 35 °C
  • Relative humidity : ≤ 85 %
Aniline Test Equipment : Aniline Point Tester LAPT-A10
Aniline Point Tester LAPT-A10
  • Measurement range : Room temperature ~ 150°C
  • Stirring speed : 0 ~ 1200 r / min
  • Heating power : 25 W
  • Interior Dimension : 360 × 250 × 545 mm
  • Exterior Dimension : 370 × 320 × 630 mm
Aniline Test Equipment : Aniline Point Tester LAPT-A11
Aniline Point Tester LAPT-A11
  • Temperature controlling accuracy : ≤ 0.5 ℃
  • Temperature controlling range : Room temperature ~ 200 ℃
  • Power supply for illumination : 5 V
  • Power of motor : 2 kW
Closed Cup Flash Point Tester : Automatic PMCC Flash Point Tester LCFP-A11

Automatic PMCC Flash Point Tester LCFP-A11
  • Ambient temperature : 10 °C ~ 40 °C
  • Relative humidity : ≤ 80 %
  • Measurement Range : Ambient Temperature ~ 250 °C
  • Flash Point : Lower than 104 °C , error is 2 °C; Higher than 104 °C , error is 6 °C
  • Resolution : 0.1 °C
Closed Cup Flash Point Tester : Automatic PMCC Flash Point Tester LCFP-A13

Automatic PMCC Flash Point Tester LCFP-A13
  • Ambient temperature : 10 °C ~ 40 ℃
  • Relative humidity : ≤ 80 %
  • Ignition Mode : electron igniter / gas flame
  • Temperature range : Room Temperature ~ 300 ℃
  • Measurement Range : Room Temperature ~ 300 ℃
Closed Cup Flash Point Tester : PMCC Flash Point Tester LCFP-A10
PMCC Flash Point Tester LCFP-A10
  • Ambient temperature : ≤ 35 °C
  • Relative humidity : ≤ 85 %
  • Temperature range : 5 °C ~ 110 °C, Each scale division is 0.5 °C; 20 °C ~ 150 °C, Each scale division is 1.0 °C; 90 °C ~ 370 °C, Each scale division is 2 °C
  • Aperture of ignition device : 0.8 mm
  • Standard oil cup-Inner diameter : 50.7 ~ 50.8 mm
Demulsibility Characteristics Tester : Petroleum Oils and Synthetic Fluids Demulsibility Characteristics Tester LDCT-A10
Petroleum Oils and Synthetic Fluids Demulsibility Characteristics Tester LDCT-A10
  • Ambient temperature : Room temperature to 35 °C
  • Relative humidity : ≤ 85 %
  • Timing range : 1 s to 9 min 59 s
  • Temperature controlling range : Room temperature to 99.9 °C
  • Temperature controlling accuracy : ± 1 °C
Demulsibility Characteristics Tester : Petroleum Oils and Synthetic Fluids Demulsibility Characteristics Tester LDCT-A11

Petroleum Oils and Synthetic Fluids Demulsibility Characteristics Tester LDCT-A11
  • Ambient temperature : Room temperature to 35 °C
  • Relative humidity : ≤ 85 %
  • Temperature controlling range : Room temperature to 99.9 °C
  • Temperature controlling accuracy : ± 1 °C
  • Stirring speed : 1500 ± 15 rpm
Density Tester : Density Tester LDMT-A10

Density Tester LDMT-A10
  • Cubage of bath : Ф300 × 380 mm
  • Temperature controlling range : 0 °C ~ 100 °C
  • Temperature controlling accuracy : ± 0.2 °C
  • Temperature sensor : Industrial platinum resistance, Pt100
  • Thermometer : Total immersion mercury thermometer
Distillation Tester : Automatic Distillation Apparatus LADA-A10
Automatic Distillation Apparatus LADA-A10
  • Heating power : 2 kW
  • Cooling power : 0.5 kW
  • Steam temperature : 0 to 400℃
  • Oven temperature : 0 to 500℃
  • Refrigeration temperature : 0 to 60℃
Distillation Tester : Benzene Distillation Tester (Low Temperature) LDT-A11
Benzene Distillation Tester (Low Temperature) LDT-A11
  • Ambient temperature : -10°C to 35°C
  • Relative humidity : ≤ 85 %
  • Thermometer : Each one for 70°C to 90°C , 100°C to120°C , and 125°C to 150°C
  • Scale division : 0.1 ℃
  • Total length : 8000 mm
Distillation Tester : Distillation Tester (low temperature Double units) LDT-A16

Distillation Tester (low temperature Double units) LDT-A16
  • Graduated flasks : 100 ml
  • Distillation flask : 125 ml
  • Ambient temperature : ≤ 35 °C
  • Relative humidity : ≤ 85 %
  • Temperature controlling accuracy : ± 0.5 °C
Distillation Tester : Distillation Tester (low temperature single unit) LDT-A17

Distillation Tester (low temperature single unit) LDT-A17
  • Graduated flasks : 100 ml
  • Distillation flask : 125 mL
  • Ambient temperature : ≤ 30 °C
  • Relative humidity : ≤ 85 %
  • Temperature controlling range : 0 °C to 60 °C
Distillation Tester : Distillation Tester Dual Units LDT-A15
Distillation Tester Dual Units LDT-A15
  • Graduated flasks : 100 ml
  • Scale division of graduated flask : 1ml
  • Distillation flask : 125 ml
  • Ambient temperature : ≤ 35 °C
  • Relative humidity : ≤ 85 %
Distillation Tester : Distillation Tester Front Type LDT-A14
Distillation Tester Front Type LDT-A14
  • Distillation flask : 125 mL
  • Ambient temperature : Room temperature to 35 °C
  • Relative humidity : ≤ 85 %
  • Thermometer : (-2 )°C to 300 ℃ and (-2) °C to 400 ℃
  • Division value : 1℃
Dropping Point Tester : Dropping Point Tester (Air bath) LDPT-A11

Dropping Point Tester (Air bath) LDPT-A11
  • Ambient temperature : ≤ 35 ℃
  • Relative humidity : ≤ 85 %
  • Heating power of electric furnace : 250 W × 2
  • Total power consumption : ≤ 700 W
  • Power supply : AC 220 V ± 10 %, 50 Hz
Dropping Point Tester : Dropping Point Tester (Oil Bath) LDPT-A10

Dropping Point Tester (Oil Bath) LDPT-A10
  • Beaker quantity : 600 ml
  • Ambient temperature : (-10) °C ~ 40 °C
  • Relative humidity : ≤ 85 %
  • Thermometer Measurement range : (-5) °C ~ 300 °C
  • Thermometer Scale division : 1 °C
Engler Viscometer (ID 214) : Engler Viscometer LEV-A10
Engler Viscometer LEV-A10
  • Graduated Flask : 200 ± 0.2 ml
  • Standard Water Value : 51 ± 1 s
  • Temperature Range : 0 ~ 100 °C
  • Temperature Controlling Accuracy : ± 0.2 °C
  • Accuracy Of Timer : 0.01 s
Engler Viscometer (ID 214) : Engler Viscometer LEV-A11
Engler Viscometer LEV-A11
  • Graduated Flask : 100 ml
  • Standard Water Value : 51 ± 1 s
  • Temperature Range : 0 ~ 100 °C
  • Temperature Controlling Accuracy : ± 0.1 °C
  • Accuracy Of Timer : 0.01 s
Engler Viscometer (ID 214) : Engler Viscometer LEV-B10

Engler Viscometer LEV-B10
  • Graduated Flask : 200 ± 0.2 ml (50 ± 0.2 ml for bituminous materials)
  • Standard Water Value : 51 ± 1 s
  • Temperature Range : 0 ~ 100 °C
  • Ambient Temperature : 10 °C ~ 40 °C
  • Temperature Controlling Accuracy : ± 0.1 °C
Existent Gum Tester (ID 215) : Existent Gum Tester LEGT- B30

Existent Gum Tester LEGT- B30
  • Bath type : Oil bath
  • Bath capacity : 5000 ml ± 50 ml
  • Ambient temperature : Room temperature to 35 °C
  • Relative humidity : ≤ 85 %
  • Temperature controlling range : RT to 250 °C
Existent Gum Tester (ID 215) : Existent Gum Tester LEGT- B31
Existent Gum Tester LEGT- B31
  • Evaporation bath type and size : Aluminum block bath, φ260 × 130 mm
  • Holes for testing : 3 pieces
  • Size of holes for testing cylinder : φ51 × 70 mm
  • Flow rate display : Flow meter
  • Working temperature : 60 ℃ to 165 ℃
Existent Gum Tester (ID 215) : Existent Gum Tester LEGT- B32
Existent Gum Tester LEGT- B32
  • Evaporation bath type and size : Aluminum bath φ260 × 130 mm
  • Holes for testing : 5 pieces
  • Size of holes for testing cylinder : φ51 × 70 mm
  • Working temperature : 160 ℃ ~ 165℃
  • Working pressure for decompression valve : 0.07 MPa
Kinematics Viscometer : Kinematics Viscometer LKV-A10

Kinematics Viscometer LKV-A10
  • Ambient temperature : 15 to 35°C
  • Relative humidity : ≤ 85%
  • Capillary viscometer : 6 capillary Pinkevitch viscometer tubes
  • Stirring motor : 1200 rpm
  • Temperature range : Ambient to 100°C
Kinematics Viscometer : Kinematics Viscometer LKV-A11

Kinematics Viscometer LKV-A11
  • Ambient temperature : (-10) °C ~ 35 °C
  • Relative humidity : ≤ 85 %
  • Capillary viscometer : 11 pieces
  • Stirring motor : 6 W, 1200 rpm
  • Temperature controlling accuracy : ± 0.1 °C
Kinematics Viscometer : Kinematics Viscometer LKV-A12
Kinematics Viscometer LKV-A12
  • Ambient temperature : (-10) °C ~ 35 °C
  • Relative humidity : ≤ 85 %
  • Capillary viscometer : 11 pieces
  • Stirring motor : 6 W, 1200 rpm
  • Temperature controlling range : Ambient temperature ~ 100 °C
Kinematics Viscometer : Kinematics Viscometer LKV-A13
Kinematics Viscometer LKV-A13
  • Ambient temperature : (-10) °C ~ 35 °C
  • Relative humidity : ≤ 85 %
  • Capillary viscometer : 7 pieces of Cannon-Fenske reserve-flow capillary viscometer tubes in a group
  • Stirring motor : 6 W, 1200 rpm
  • Sample quantity : 3 piece at the same time
Kinematics Viscometer : Kinematics Viscometer LKV-A15

Kinematics Viscometer LKV-A15
  • Ambient temperature : (-10) °C ~ 35 °C
  • Relative humidity : ≤ 85 %
  • Capillary viscometer : 11 pieces
  • Stirring motor : 6 W, 1200 rpm
  • Sample quantity : 4 piece at the same time
Kinematics Viscometer : Kinematics Viscometer LKV-A16

Kinematics Viscometer LKV-A16
  • Ambient temperature : 0 ~ 40 ºC
  • Relative humidity : 20 ~ 90 %, RH while 40 ℃
  • Temperature controlling accuracy : ± 0.1 °C
  • Timing range : 0.0 s ~ 9999.9 s
  • Barometric : 96 ~ 103 kPa
Low Temperature Tester : Automatic Pour Point Tester LLTT-A23
Automatic Pour Point Tester LLTT-A23
  • Ambient temperature : ≤ 30 ℃
  • Refrigeration speed : > 40 °C / 10 min
  • Repeatability for solidifying point : ≤ 2 °C
  • Repeatability for pour point : ≤ 3 °C
  • Reproducibility : ± 4 °C
Low Temperature Tester : Distillate Fuel Cold Filter Plugging Point Filter LLTT-A12
Distillate Fuel Cold Filter Plugging Point Filter LLTT-A12
  • Ambient temperature : (-10)℃ ~ 35 ℃
  • Relative humidity : ≤ 85 %
  • Sample cup Inner diameter : 31.0 ~ 32.0 mm
  • Sample cup Wall thickness : 1.0 ~ 1.5 mm
  • Sample cup Height : 115 ~ 125 mm
Low Temperature Tester : Freezing Point Tester LLTT-A11

Freezing Point Tester LLTT-A11
  • Freezing point range : -54°C to 2°C
  • Cold bath measurement temperature range : -70° to 20°C
  • Temperature controlling accuracy : ±0.5°C
  • Bath liquids stirring : Electric
  • Bath liquids stirring range : 1200 r/min
Low Temperature Tester : Multifunctional Low Temperature Tester LLTT-A16

Multifunctional Low Temperature Tester LLTT-A16
  • Refrigeration system : New-type refrigeration compressor
  • Controlling temperature of cold trough : Cold trough I: 0 °C, ± 0.5 °C; Cold trough II: 0 °C, (-17) °C, ± 0.5 °C; Cold trough III: (-17) °C, (-34) °C, ± 0.5 °C; Cold trough IV: (-70) °C, ± 0.5 °C
  • Ambient temperature : ≤ 30 ℃
  • Relative humidity : ≤ 85 %
  • Dimensions : 930 x 570 x 108 mm
Low Temperature Tester : Pour and Cloud Point Tester LLTT-A14
Pour and Cloud Point Tester LLTT-A14
  • Chamber quantity : 2 chambers
  • Chamber 01 temperature control : Ambient to -51 ℃
  • Chamber 02 temperature control : Ambient to -65 ℃
  • Temperature precision : ±1°C
  • Ambient temperature : ≤ 30°C
Low Temperature Tester : Solidifying Point and Cold Filter Plugging Point Tester LLTT-A15
Solidifying Point and Cold Filter Plugging Point Tester LLTT-A15
  • Refrigeration system : New-type refrigeration compressor
  • Controlling temperature of cold trough : Cold trough I: RT ~ (-51) °C, ± 1°; Cold trough II:RT ~ (-80) °C, ± 1 °C
  • Ambient temperature : ≤ 30 ℃
  • Relative humidity : ≤ 85 %
  • Inner Dimensions : 560 x 380 x 250 mm
Open Cup Flash Point Tester : Automatic Cleveland Open Cup Flash Point Tester LOFP-A12

Automatic Cleveland Open Cup Flash Point Tester LOFP-A12
  • Ambient Temperature : 10 ℃ ~ 40 °C
  • Relative Humidity : ≤ 80 %
  • Temperature Measurement- Full Scale : Ambient temperature to 300 °C
  • Temperature Measurement- Repeatability : ≤ 8 °C
  • Temperature Measurement- Reproducibility : ≤ 16 °C
Open Cup Flash Point Tester : Automatic COC Flash & Fire Point Tester LOFP-B10

Automatic COC Flash & Fire Point Tester LOFP-B10
  • Ambient Temperature : 10 ℃ ~ 40 ℃
  • Relative Humidity : ≤ 85 %
  • Temperature Measurement- Full Scale : Ambient temperature to ~ 400 ℃
  • Temperature Measurement- Repeatability : ≤ 4 ℃
  • Test accuracy : 0.005
Open Cup Flash Point Tester : Cleveland Open Cup Flash Point Tester LOFP-A11
Cleveland Open Cup Flash Point Tester LOFP-A11
  • Thermometer : 6 ℃ ~ 400 ℃
  • Scale Division : 2 °C
  • Spout Aperture : 0.6 ~ 0.8 mm
  • Ambient Temperature : -10 ℃ ~ 50 ℃
  • Relative Humidity : ≤ 85 %
Open Cup Flash Point Tester : Open Cup Flash Point Tester LOFP-A10
Open Cup Flash Point Tester LOFP-A10
  • Thermometer : 0 ℃ ~ 360 °C
  • Scale Division : 1 °C
  • Ambient Temperature : ≤ 35 °C
  • Relative Humidity : ≤ 85 %
  • Outer Crucible-Material : Carbon structural steel
Other Instrument : Color Tester LCT-A20

Color Tester LCT-A20
  • Light source : 220 V, 100 W
  • Temperature of grinding milk white light bulb : 2750 ± 50 K
  • Light hole( Φ14) : 26 pieces
  • Color comparing tube : Φ32 mm
  • Dimension : 440 x 420 x 340 mm
Other Instrument : Insulating Oil Breakdown Voltage Tester LIBT-A23

Insulating Oil Breakdown Voltage Tester LIBT-A23
  • Power supply : AC 220 V ± 5 % , 50Hz
  • Measurement range : 0 ~ 75 kV
  • Voltage rising rate : 3 kV ± 10 % / s
  • Distance between electrodes : 2.5 mm
  • Output power : 2 kVA
Other Instrument : Mechanical Impurity Tester (Weight Method) LMIT-A21
Mechanical Impurity Tester (Weight Method) LMIT-A21
  • Dimension : 390 x 260 x 590 mm
  • Total power consumption : ≤ 1200 W
  • Power supply : AC 220 V ± 10 %, 50 Hz
  • Heating power of water bath : 1000 W
  • Relative humidity : ≤ 85 %
Other Instrument : Wax Oil Content Tester LWCT-A22
Wax Oil Content Tester LWCT-A22
  • Power supply : AC 220 V ± 10 %, 50 Hz
  • Temperature controlling range in water bath : RT ~ 90 ℃ ± 5 ℃
  • Cooling bath temperature : (-35) ℃ ± 1 ℃
  • Evaporation temperature : 35 ℃ ± 1 ℃
  • Flow rate : 2 ~ 3 L / min
Oxidation Stability Tester : Automatic Lubricating Oils Oxidation Stability Tester LOST-D10

Automatic Lubricating Oils Oxidation Stability Tester LOST-D10
  • Samples : 2
  • Oil bath cubage : 30 L
  • Angle between bomb and water surface : 30 °
  • Speed of rotary assembly : 100 ± 5 RPM
  • Pressure sensor : 0 to 1.6 Mpa; Accuracy: ±2%
Oxidation Stability Tester : Distillate Fuel Oil Oxidation Stability Tester LOST-D12

Distillate Fuel Oil Oxidation Stability Tester LOST-D12
  • Samples : 8
  • Temperature : 100 ℃
  • Temperature controlling accuracy : 0.1 ℃
  • Flow meter : 3 ± 0.3 L / H oxygen
  • Power supply : 220 V ± 10 %, 60 Hz
Oxidation Stability Tester : Gasoline Oxidation Stability Tester LOST-D13
Gasoline Oxidation Stability Tester LOST-D13
  • Type : Compact; Desktop
  • Design : Integrated
  • Bath : Metal bath (without water usage)
  • Temperature control point of metal bath : 100℃ ± 1℃
  • Ambient temperature : ≤ 30℃
Oxidation Stability Tester : Oxidation Stability Tester (Lubricating Grease) LOST-D20
Oxidation Stability Tester (Lubricating Grease) LOST-D20
  • Temperature Range : Ambient to 150℃
  • Temperature Precision : ± 0.1°C
  • Test Unit : 2 units
  • Heating Power : 1800 W
  • Ambient Temperature : (Room temperature to 35°C
Oxidation Stability Tester : Transformer Oil Oxidation Stability Tester LOST-D11

Transformer Oil Oxidation Stability Tester LOST-D11
  • Samples : 6
  • Temperature controlling mode : Automatic digital temperature
  • Temperature controlling range : Room temperature ~ 160 °C
  • Temperature controlling accuracy : ± 0.2 °C
  • Power supply : 220 V, 50 Hz
Oxygen Bomb Calorimeter : Oxygen Bomb Calorimeter LBC-C20

Oxygen Bomb Calorimeter LBC-C20
  • Heat capacity : 14000 ~ 15000 J / K
  • Temperature measurement range : 10 ~ 35 ℃
  • Repeatability error : ≤ 0.2 % (Grade C)
  • Endured pressure in oxygen bomb : 20 MPa
  • Operation environment temperature : 15 ~ 28 ℃
Oxygen Bomb Calorimeter : Oxygen Bomb Calorimeter LBC-C21
Oxygen Bomb Calorimeter LBC-C21
  • Temperature controlling range : 10 ℃ ~ 35 ℃
  • Temperature resolution : 0.001 ℃
  • Mean value of heat capacity : 15 kJ / K
  • Ambient temperature : 20 ℃ ± 5 ℃
  • Relative humidity : ≤ 85 %
Oxygen Bomb Calorimeter : Oxygen Bomb Calorimeter LBC-C22
Oxygen Bomb Calorimeter LBC-C22
  • Temperature measurement range : 10 ~ 35 ℃
  • Repeatability error : ≤ 0.2 % (Grade C)
  • Endured pressure in oxygen bomb : 20 MPa
  • Operation environment temperature : 15 ~ 28 ℃
  • Temperature resolution : 0.001 ℃
Residue Carbon : Carbon Residue Tester (CONRADSON METHODS) LRCT-B10

Carbon Residue Tester (CONRADSON METHODS) LRCT-B10
  • Porcelain crucible : 30 ml
  • Inner iron crucible : 75 ml
  • Outer iron crucible : 190 ml
  • Burner : Mig Burner
  • Dimensions : 400 x 380 x 270 mm
Residue Carbon : Carbon Residue Tester (Digital Temperature Controlled Electric Furnace Methods) LRCT-B11

Carbon Residue Tester (Digital Temperature Controlled Electric Furnace Methods) LRCT-B11
  • Bath type : Four holes with a furnace
  • Heating type : Electric resistance furnace
  • Temperature controlling range : 0 ~ 520 °C
  • Temperature controlling accuracy : ± 5 °C
  • Relative humidity : ≤ 85 %
Residue Carbon : Carbon Residue Tester (Ramsbottom) LRCT-B20
Carbon Residue Tester (Ramsbottom) LRCT-B20
  • Coking furnace : Metal furnace
  • Heating mode : Electric heating
  • Test unit : 5 units
  • Temperature range : Ambient to 550°C
  • Temperature precision : ≤ ± 5℃
Rotational Viscometer : Rotational Viscometer LRV-A10
Rotational Viscometer LRV-A10
  • Viscosity measurement range : 10 ~ 2000000 MPa•s
  • Ambient temperature : 5 °C ~ 35 °C
  • Ambient humidity : Not more than 80 %
  • Spindles : Four spindles of No.1 ~ 4
  • Spindle speed : 0.3, 0.6, 1.5, 3, 6, 12, 30 and 60 rpm
Rust and Corrosion Tester : Copper Strip Corrosion Tester LRCT-A13

Copper Strip Corrosion Tester LRCT-A13
  • Sample hole : 4 pieces
  • Sample quantity : 4 to 12 pieces
  • Ambient temperature : Room temperature to 35 °C
  • Temperature controlling range : Room temperature to 100°C
  • Temperature controlling accuracy : ± 1°C
Rust and Corrosion Tester : Liquefied Petroleum Gas Copper Corrosion Tester LRCT-A10

Liquefied Petroleum Gas Copper Corrosion Tester LRCT-A10
  • Sample hole : 2 pieces
  • Speed of stirring motor : 1400 rpm
  • Ambient temperature : 10 to 35°C
  • Temperature controlling range : Room Temperature to 100°C
  • Temperature controlling accuracy : ± 0.5°C
Rust and Corrosion Tester : Lubricating Oil Rust Characteristics Tester LRCT-A11
Lubricating Oil Rust Characteristics Tester LRCT-A11
  • Sample hole : 4 pieces
  • Speed of stirring motor : 1400 rpm
  • Speed for sample stirring : 1000 ± 50 rpm
  • Ambient temperature : Room temperature to 35°C
  • Temperature controlling range : 0 to 100°C
Rust and Corrosion Tester : Rust Characteristics and Corrosion Tester LRCT-A12
Rust Characteristics and Corrosion Tester LRCT-A12
  • Sample hole : 4 pieces
  • Ambient temperature : Room temperature to 35°C
  • Temperature controlling range : 0 to 100°C
  • Temperature controlling accuracy : ± 1°C
  • Relative humidity : ≤ 85 %
Sulphur Content Tester : Dark Petroleum Products Sulphur Content Tester (Tubular Oven Method) LST-A11

Dark Petroleum Products Sulphur Content Tester (Tubular Oven Method) LST-A11
  • Air flow rate : Not less than 150 L / h
  • Max. Preset time : 99 min 59 s (100 min)
  • Chamber diameter of oven : Φ22 mm
  • Heating power of oven : 1400 W × 2
  • Max. Temperature of oven : 950 °C
Sulphur Content Tester : X-ray Fluorescence Sulfur in Oil Analyzer LST-A10

X-ray Fluorescence Sulfur in Oil Analyzer LST-A10
  • Sample quantity : 2 to 3 ml (it is equal to sample depth of 3 mm to 4 mm)
  • Measurement time : 60, 120, 240, 300, and 600 s at random
  • Measurement range : 7 ppm to 5 %
  • Repeatability : < 0.029 (S + 0.6)
  • Reproducibility : < 0.063 (S + 0.6)
Vapor Pressure : Petroleum Products Vapor Pressure Tester（REID METHODS) LVPT-C11
Petroleum Products Vapor Pressure Tester（REID METHODS) LVPT-C11
  • Test bomb : Two samples or a group of parallel samples
  • Bath temperature : 37.8 °C
  • Temperature controlling accuracy : 0.1 °C
  • Dimensions : 500 × 560 × 680 mm, 950 × 540 × 720 mm
  • Heating power of water bath : 1400 W
Vapor Pressure : Vapor Pressure Tester (REID METHOD) LVPT-C10
Vapor Pressure Tester (REID METHOD) LVPT-C10
  • Operation temperature of water bath : RT ~ 90 °C
  • Temperature controlling accuracy : ± 0.1 °C
  • Dimensions : 550 × 520 × 102 mm
  • Pressure meter accuracy : ± 0.4 % kPa
  • Heating power of water bath : 1600 W
Water Content Tester : Coulometric Karl Fischer Titrator LWT-A30

Coulometric Karl Fischer Titrator LWT-A30
  • Ambient Temperature : 10°C to 35°C
  • Measurement Range : 0 to 100 mg
  • Resolution : 0.1 µg
  • Max. Electrolysis Speed : 40 µg /s
  • Amount and Precision of electrolysed water : 10 µg to 1000 µg, ± 2 µg and >1000 µg, 0.2 %
Water Content Tester : Coulometric Karl Fischer Titrator LWT-A31

Coulometric Karl Fischer Titrator LWT-A31
  • Maximum current : 400 mA
  • Measurement range : 3 µg to 9999.9 µg
  • Resolution : 0.1 µg
  • Precision 1 : ± 2 µg (3µg H<sub>2</sub>O to 20µg H<sub>2</sub>O)
  • Precision 2 : ± 3 µg (20µg H<sub>2</sub>O to 100µg H<sub>2</sub>O)
Water Content Tester : Crude Petroleum Water Content Tester LWT-B10
Crude Petroleum Water Content Tester LWT-B10
  • Ambient Temperature Range : -10 to 35°C
  • Relative Humidity : ≤85%
  • Distillation Flask : 1000 ml
  • Receiver : 5 ml, with 0.05 ml graduation
  • Condenser : 400 mm with ± 5 mm accuracy
Water Content Tester : Water Content Tester LWT-A10
Water Content Tester LWT-A10
  • Ambient Temperature Range : ≤ 35°C
  • Relative Humidity : ≤ 85%
  • Heating Mantle Cap Power : 1000 W
  • Sample Determination : 1 at a time
  • Dimension : 580 × 350 × 300 mm
Water Content Tester : Water Content Tester LWT-A11

Water Content Tester LWT-A11
  • Ambient Temperature Range : ≤ 35°C
  • Relative Humidity : ≤ 85%
  • Heating Mantle Cap Power : 1000 W × 2
  • Sample Determination : 2 at a time
  • Dimension : 690 × 570 × 310 mm
Automatic Tag Closed Flash Point Tester : Automatic Tag Closed Flash Point Tester LACF-A10

Automatic Tag Closed Flash Point Tester LACF-A10
  • Experimental temperature range : -50 to 70°C
  • Test sample volume : 50 ml
  • Ambient temperature range : 10 to 40°C
  • Humidity : ≤ 85%
  • Ignition gas source : Pipelined gas or LPG
Specific Gravity Tester (ID 445) : Specific Gravity Tester LSGT-A10
Specific Gravity Tester LSGT-A10
  • Vessel Volume :  4000 ml × 2
  • Power of Vacuum pump : 160 W
  • Negative power : 3.7 kPa（27.75 mmHg）
  • Power of shaking machine : 30 W
  • Power supply : AC(220±10%)V, 50Hz
Automatic Dielectric Tester (ID 446) : Automatic Dielectric Tester LADT-A10
Automatic Dielectric Tester LADT-A10
  • Capacity : 2.0 kVA
  • Speed of voltage increase : 2 k V/ s
  • Voltage inspection accuracy : 0.01
  • Breakdown sensitivity : < 0.1 kV
  • Waveform distortion : ≤ 1 %
Automatic Softening Point Tester (ID 447) : Automatic Softening Point Tester LSPT-A10

Automatic Softening Point Tester LSPT-A10
  • Measurement range : 32 ℃ to 160 ℃
  • Ambient temperature : 35 °C
  • Temperature resolution : 0.01 ℃
  • Beaker volume : 1000 mL
  • Relative humidity : ≤85%
Automatic Thermogravimetric Analyzer : Automatic Thermogravimetric Analyzer LTGA-A10

Automatic Thermogravimetric Analyzer LTGA-A10
  •  Temperature range : Room temperature to 1000 ºC
  • Temperature resolution : 0.1 ºC
  • Temperature fluctuation : ±0.1 ºC
  • Heating rate : 1 ~ 80 ºC / min
  • Cooling time : 15min  (1000ºC ~ 100ºC)
Penetrometer : Penetrometer LMPT-A10
Penetrometer LMPT-A10
  • Measurement range : 0 to 600 penetration scale
  • Timing controller : 5 sec, 8 sec, 10 sec, 12 sec, 30 sec and 60 sec
  • Time accuracy : ± 0.1 seconds
  • Resolution : 0.01 mm
  • Penetration accuracy : ± 1 penetration
Penetrometer : Penetrometer LMPT-A11
Penetrometer LMPT-A11
  • Measurement range : 0 to 600 penetration scale
  • Timing controller : 5 sec or 60 sec
  • Time accuracy : ± 0.1 seconds
  • Resolution : 0.01 mm
  • Penetration accuracy : ± 1 penetration
Penetrometer : Penetrometer LMPT-A12

Penetrometer LMPT-A12
  • Penetrometer : <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Measurement range</strong></td><td>0 to 600 penetration scale</td></tr><tr><td><strong>Timing controller</strong></td><td>5 sec or 60 sec</td></tr><tr><td><strong>Time accuracy</strong></td><td>± 0.1 seconds</td></tr><tr><td><strong>Resolution</strong></td><td>0.1 penetration</td></tr><tr><td><strong>Penetration accuracy</strong></td><td>± 1 penetration</td></tr><tr><td><strong>Weight of standard needle</strong></td><td>2.5 ± 0.05 g</td></tr><tr><td><strong>Dimensions (W × L × H)</strong></td><td>700 × 400 × 750 mm</td></tr><tr><td><strong>Weight</strong></td><td>30 kg</td></tr></table>
  • Circulatory Water Bath : <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Bath volume</strong></td><td>3.5 L</td></tr><tr><td><strong>Temperature range</strong></td><td>5 °C to 60 °C</td></tr><tr><td><strong>Temperature accuracy</strong></td><td>± 0.1 °C</td></tr><tr><td><strong>Circulatory water quantity</strong></td><td>3 L/minute</td></tr><tr><td><strong>Pump Lift</strong></td><td>2 m</td></tr><tr><td><strong>Power consumption</strong></td><td>1200 W</td></tr><tr><td><strong>Power supply</strong></td><td>AC 220V ± 10 %, 50 Hz</td></tr><tr><td><strong>Dimensions (W × L × H)</strong></td><td>600 × 400 × 650 mm</td></tr><tr><td><strong>Weight</strong></td><td>40 kg</td></tr></table>
Penetrometer : Penetrometer LMPT-A13

Penetrometer LMPT-A13
  • Measurement range : 0 to 600 penetration scale
  • Timing range : 0 sec to 60 sec
  • Time accuracy error : ≥ ± 0.1 seconds
  • Resolution : 0.1 penetration
  • Power consumption : 200 W
Foaming Characteristics Tester (ID 604) : Foaming Characteristics Tester LFCT-A10
Foaming Characteristics Tester LFCT-A10
  • Temperature Range : Ambient to 100°C
  • Temperature Precision : ± 0.1°C
  • Air Flow : 94 mL ± 5 mL/min, with flowmeters
  • Timing Unit : 0 to 99 min 59 s, resolution 1 s
  • Control System : Single chip microcontroller
Ash Content Tester (ID 605) : Ash Content Tester LACT-A10
Ash Content Tester LACT-A10
  • Electric Muffle Furnace : <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Controlled temperature</strong></td><td>775 ±25 ℃</td></tr><tr><td><strong>Temperature rising time of empty chamber</strong></td><td>≤ 50 min</td></tr><tr><td><strong>Furnace temperature uniformity</strong></td><td>≤ 15℃</td></tr><tr><td><strong>Internal dimension</strong></td><td>200 × 120 × 80 mm</td></tr><tr><td><strong>External dimension</strong></td><td>490 × 490 × 450 mm</td></tr><tr><td><strong>Power consumption</strong></td><td>2.5 kW</td></tr><tr><td><strong>Power supply</strong></td><td>AC 220V ±10%, 50 Hz</td></tr><tr><td><strong>Net weight</strong></td><td>35 kg</td></tr></table>
  • Temperature controller : <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Maximum control temperature</strong></td><td>1200 ℃</td></tr><tr><td><strong>Dimension</strong></td><td>500 × 300 × 235 mm</td></tr><tr><td><strong>Power consumption</strong></td><td>5000 W</td></tr><tr><td><strong>Power supply</strong></td><td>AC 220±10% V, 50Hz</td></tr><tr><td><strong>Net weight</strong></td><td>5 kg</td></tr></table>
  • Electric heating plate : <table class="table table-striped table-bordered table-responsive"><tr><td><strong>Heating power</strong></td><td>(1 to 6) grades, continuously adjustable</td></tr><tr><td><strong>Temperature</strong></td><td>400℃</td></tr><tr><td><strong>Diameter of heating plate</strong></td><td>Φ 180 mm</td></tr><tr><td><strong>Dimension</strong></td><td>280 × 250 × 90 mm</td></tr><tr><td><strong>Power consumption</strong></td><td>2000 W</td></tr><tr><td><strong>Power supply</strong></td><td>AC 220±10%V, 50Hz</td></tr></table>
Mercaptan Sulfur Tester (ID 613) : Mercaptan Sulfur Tester LMST-A10

Mercaptan Sulfur Tester LMST-A10
  • Potential measuring range : (0 to ±1999.5) Mv
  • Intrinsic error : 0.1 % ±0.5 mV
  • Input impedance : Ri ≥1 × 1012 Ω
  • Burette capacity : 10 mL
  • Burette accuracy :  ±0.1 % (F•S)
Constant Temperature Needle Penetration Tester : Constant Temperature Needle Penetration Tester LTNP-A10

Constant Temperature Needle Penetration Tester LTNP-A10
  • Measuring range : 0 to 700 taper degree (digital display table 0-70 mm)
  • Timing device : Timing error is less than ±0.1 s
  •  Resolution : 0.01 mm
  • Needle insertion accuracy : ±1 cone insertion degree
  • Temperature range : 10 to 50˚C

Labtron Equipment Ltd. enables the customer success through innovation, cGMP manufacturing, comprehensive service offerings, ecological and corporate sustainability.

Popular Category

Quick Links

Social Media

Copyright © 2024 | Labtron Equipment Ltd | All Rights Reserved