Spectrometer | Labtron.us

Angular Spectrometer LASM-A10

Angle Measurement Accuracy : 1inch

Optical Parameter :

Focal Length	170 mm
Effective Aperture	Φ 22 mm
Field of View	3° 22inch
Focal Length of Telescope’s Eyepiece	24.3 mm
Maximum Length Between Collimator and Telescope	120 mm
Slit Width	0.02 to 2 mm
Diopter Compensation Range	≥ ± 5 diopters

Divided Circle :

Diameter	Φ178 mm
Circle Graduation	0° to 360°
Division	0.5°
Vernier Reading Value	1inch

Stage :

Diameter	Φ70 mm
Rotating Range	360°
Range of Vertical Adjustment	20 mm

Attachments :

Prism Angle	60° ± 5inch
Transformer	6.3 Ⅴ/220 Ⅴ (3 ⅤA)
Planar Holographic Grating	300/ mm

Atomic Fluorescence Spectrometer LAFS-A10

Beam Configuration : Dual Channel

Elements ( Measuring Range ) :

As, Se, Pb, Bi, Sb, Te, Sn	< 0.01 µg/L
Hg, Cd	< 0.001 µg/L
Zn	< 1.0 µg/L
Ge	< 0.1 µg/L

Precision ( RSD ) : < 1.0
Linear range : More than 3 orders of magnitude
Lamp : Hollow cathode lamp

FTIR Spectrometer LIR-B10

Spectral Range : 7800 cm^-1 to 350 cm^-1
Resolution : 0.85 cm^-1
Wave number precision : ± 0.01 cm^-1
Scanning speed : Microprocessor control, different scanning speed selectable
Signal to Noise ratio : 20,000:1( RMS value 2100^-1 to 2000^-1)

Handheld XRF Spectrometer LXRF-B10

Analytical Method : Energy dispersive X-ray fluorescence analytical Method
Elements Measuring : Atomic number from 12 to 92 [elements from magnesium (Mg) to uranium (U)] can be measured
Range : Simultaneous detector
Content measurement range : ppm to 100%
Detector : SDD detector, Simultaneous analysis 40 elements

Handheld XRF Spectrometer LXRF-B11

Analytical Method : Energy dispersive X-ray fluorescence analytical Method
Elements Measuring : Atomic number from 12 to 92 [elements from magnesium (Mg) to uranium (U)] can be measured
Range : Simultaneous detector
Content measurement range : ppm to 99.99%
Detector : SDD detector or fast SDD detector (optional)

ICP spectrometer LICP-A10

Wavelength range ( 3600 lines / mm ) : 180 to 500 nm
Wavelength range ( 2400 lines / mm ) : 180 to 800 nm
Temperature : 20 ~ 28 °C
Elements per minute : 26 elements
Humidity : 70%

ICP Spectrometer LICP-A11

Wavelength range : 180 to 900 nm
Elements per minute : 15 elements
Temperature : 29 °C
Incident slit : 25 µm
Standard deviation : RSD ≤ 2 %

ICP Spectrometer LICP-A12

Wavelength range : 195 to 800 mm
Elements per minute : 10 elements
Temperature range : 32 °C
Incident slit : 20 µm
Standard deviation : RSD ≤ 2 %

ICP Spectrometer LICP-B10

Monochromator Specifications :

Optical type	Czerny turner
Resolution	≤ 0.015nm (3600 line grating) ≤ 0.030nm (2400 line grating)
Focal length	1000 mm
Grating specifications	huge holographic grating with 3600 L/mil or 2400 L/mil and 80 mm × 100 mm of ruling area
Wavelength range	195 to 500 nm for 3600 line grating 195 to 800 nm for 2400 line grating

Solid State Power Specifications :

Frequency	27.12 MHz Frequency stability: < 0.05%
Spray chamber	Scott double pass spray chamber
Output power	800 W to 1600 W, adjustable with power efficiency more than 65%
Output power stability	≤ 0.05%
Induction coil	25 mm × 3 ID (ID-internal diameter), equipped with three concentric quartz torch tubes 35 mm ED (ED-external diameter)

Technical Specifications :

Suitable sample content range	Liquid sample: 0.01 ppm to several thousand ppm Solid or power sample: 0.001% to 70%
Repeatability	short-term stability- RSD ≤ 1.5% Long-term stability: RSD ≤ 2%
Test speed	5 to 8 elements / min
Limits of detection (LOD, µg/L) for most elements	1ppb to 10ppb

Control Circuit :

Photomultiplier tube specification	R212 / R928
Negative high voltage	-50 to -1000 V
Circuit measuring range	(10^-12 to 10 ^-4) A
Signal acquisition	VF conversion

Working Environment :

Temperature for storage and transportation	15°C to 25°C
Humidity for storage and transportation	≤ 70%
Power Stability	220 ± 10V; 50 to 60 V
Humidity	≤ 70%
Temperature	15°C to 30°C

$XRD Diffractometer LXRD-A10$

XRD Diffractometer LXRD-A10

X-ray Tuble : Glass tube, Ceramic tube, Ripple Ceramic tube: Cu, Fe, Co, Cr, Mo etc., Power 2 kW
Focus Size : 1 × 10 mm/ 0.4 × 14 mm/ 2 × 12 mm
Stability : ≤ 0.01 %
Tube Current : 5 to 80 mA
Tube Voltage : 10 to 60 kV

XRF-Spectrometer LXRF-A10

Measureable elements : S to U
Detection limit : 1 ppm
Temperature : 15 ~ 30 °C
Elemental content : 1 ppm to 99 %
Repeatability : 0.001

Labtron Equipment Ltd. enables the customer success through innovation, cGMP manufacturing, comprehensive service offerings, ecological and corporate sustainability.