Gas Chromatography LGC-B11

Overview

Gas Chromatography LGC-B11 is a benchtop unit with advanced flow controller (AFC) technology. System has digital control mode and polar capillary columns to separate polar analytes. GC oven is capable of 9 temperature program ramps and hold steps, and features rapid cooling: 250 °C to 50 °C < 10 minutes. Accurate flow rate control via AFC has higher level repeatability of retention time and peak area, enabling specific level of analysis by means of dual FID detectors.

Specifications :

Oven	Maximum capacity 22 L Temperature range RT + 5 ℃ to 400 ℃ Temperature accuracy ± 0.1 ℃ Temperature program 9-phase/ 10 platform Program total time 9999.9 min Maximum temperature heating rate 0.1 to 60 ℃/ min Maximum cooling rate ˂ 10 mins (250 to 50 ℃)
Sample injector	Temperature range RT+ 7 ℃ to 420 ℃ Temperature control Automatic Injector type Column or split Maximum sample inlet 3 pcs Carrier gas flow type Constant pressure Pre column pressure range 0 to 400 kPa Pre column pressure accuracy 0.1 kPa Mobile phase flow range H2: 0 to 200 ml/min, N2: 0 to 150 ml/min
Detector	Temperature range RT + 7 ℃ to 420 ℃ Maximum installation Dual detector Flame ignition mode Automatic Flame Ionization Detector (FID) Logarithmic amplifier High voltage switch control Baseline signal display Ignition coil control Detection limit: ≤3 ×10 to 12 g/s (Sample: n-hexadecane) Baseline noise: ≤ 5 × 10 - 14 A Baseline draft: ≤ 6 × 10 -13 A Dynamic range: 10 7 RSD: ≤ 3 %
Power supply	AC 220 V ± 22 V, 50 Hz ± 0.5 Hz, 3000 W
Packing dimension	1020 × 660 × 740 mm
Gross Weight	82 kg
Net weight	70 kg

Features :

• -  7-inch LCD display specifies temperature, gas flow and heating curve
• -  H2 and N2 mobile gas phase with AFC and constant pressure gas flow type
• -  Equipped with capillary analysis system and capillary split sampler
• -  Injection system incorporates diaphragm cleaning, split flow and auxiliary gas adjustment
• -  Standard unit for high-speed analysis with polar capillary column
• -  PEG-20M and FFAP stationary phase polar capillary columns can be coupled
• -  Dual FID detector with automatic flame ignition and baseline signal display
• -  Self-diagnostic and automatic fault recognition function
• -  Multi-core and 32-bit embedded hardware system ensures the reliable operation
• -  Equipped with chromatography workstation software to process data
• -  Memory function can store 20 sample test data
• -  RS232 interface and LAN port

Applications :

Suitable for analysis of trace toxic compounds, monitoring and research in environmental protection, atmosphere and water source pollution. It is widely used for petrol-chemistry, environmental protection, epidemic prevention, pharmacology and scientific research.

Standard Accessories :

Accessories no	Accessories name
1.	FID detector system
2.	Capillary injection system
3.	Chromatography workstation software

Optional Accessories :

Accessories no	Accessories name
1	Polar capillary columns PEG-20M Stationary phase: 30 m × 0.32 mm injector temperature: 250 ℃ Oven temperature: 165 ℃ Detector: FID- 250 ℃ Inlet pressure: 0.04 Mpa
2	Polar capillary columns FFAP Stationary phase: 30 m × 0.32 mm Injector temperature: 250 ℃ Oven temperature: 165 ℃ Detector: FID- 250 ℃ Inlet pressure: 0.04 Mpa
3	Syringe 1 ul
4	Syringe 5 ul