Portable Conductivity Meter LPCM-A11 is adapted with different modes for measuring quality of water on parameters such as conductivity, TDS and temperature. Due to its portable design, it is suitable for outdoor measurements i.e. on site water testing, remote area water testing and for research purpose. It is reliable and user friendly.
Conductivity |
Conductivity measurement range |
0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm |
Conductivity accuracy |
±0.5% F.S |
Conductivity calibration points |
1 to 5 points |
Conductivity calibration solutions |
10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom |
Conductivity resolution |
0.001, 0.01, 0.1, 1 |
|
TDS |
TDS range |
0 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt) |
TDS accuracy |
±1 % F.S |
TDS factor |
0.01 to 1.00 (Default 0.5) |
TDS resolution |
0.01, 0.1, 1 |
|
Temperature |
Temperature measuring range |
0 105 °C, 32 to 221 °F |
Temperature measuring accuracy |
± °0.5 C, ± 0.9 °F |
Temperature calibration points |
1 point |
Temperature resolution |
0.1 °C, 0.1 °F |
|
Temperature compensation |
0 to 100 °C, 32 to 212 ° F, Manual or Automatic |
Temperature coefficient |
Linear and Pure water compensation |
Reference temperature |
20 °C or 25 °C |
Stability conditions |
Low or high |
Cell constant |
K= 0.1, 1, 10 or custom |
Calibration due |
1 to 31 days or off |
Memory |
500 data sets |
Data hold |
Manual or auto-end point |
Connector |
6 pin mini plug |
Power Control |
Manual or Automatic (10, 20 or 30 minutes after last key pressed) |
Power |
3 × 1.5 V AA batteries or DC 5 V power adapter |
Dimension (L × W × H) |
170 × 85 × 30 mm |
Weight |
300 g |
Used for quality testing of water on different parameters in research and development labs, water resources and plants in nearby or remote area.