Overview
Pocket Dissolved oxygen tester LPKDO-A10 is equipped with polarographic sensor to measure dissolved oxygen content. The system menu of dissolved oxygen meter can set 6 parameters which includes the number of calibration points, temperature units etc. It can measure the dissolved oxygen content present in water, waste water, other liquids & solutions.
Specifications :
| Dissolved oxygen range |
0.0 to 20.0 mg/L (or ppm) |
| Dissolved oxygen accuracy |
± 0.5 mg/L |
| % of saturation of oxygen |
0.0 to 200.0% |
| Sensor type |
Polarographic dissolved oxygen probe |
| % Saturation of oxygen accuracy |
± 10 % F.S. |
| Temperature compensation range |
0 °C to 40 °C, 32 °F to 104 °F |
| Barometric pressure correction |
60.0 to 112.5 kPa, 450 to 850 mmHg |
| Salinity correction |
0 - 35 g/L |
| Data hold function |
Manual or automatic |
| Power off |
Manual or automatic (8 minute after last key is pressed) |
| Reset function |
Yes |
| Connector |
6 pin mini plug |
| Battery life |
Approximately 150 hours |
| Dimension (L × Dia.) |
175 × 40 mm |
| Weight |
100 g |
Features :
- - Equipped with polarographic sensor
- - 1 - 2 points calibration using air saturated water & zero oxygen solution
- - Manual salinity & barometric pressure compensation for better measurement of dissolved oxygen
- - System menu allows setting the 6 parameters
- - Automatic temperature compensation for accurate measured value over the entire range
- - Auto hold function freezes stable, final readings for better viewing and recording
- - Automatic power off helps to reduce battery power consumption
- - Waterproof features guarantees protection against harsh conditions
- - Battery indicator to show the remaining battery capacity
- - Reset function automatically resumes all the settings to default mode
Applications :
Pocket Dissolved oxygen tester has applications in water & waste water management industry, aquarium, surface ground water, etc. to detect content of dissolved oxygen.
Standard Accessories :
Dissolved oxygen probe
Dissolved oxygen Electrolyte solution
Membrane cap
AAA batteries
Carrying case
Optional Features :
Polarographic sensor
30 ml electrolyte solution per bottle
Membrane cap
