Pocket TDS tester LPTS-A10 is equipped with platinum sensor & 1 point push button calibration system. It comes with low TDS measurement range. It is easy to use & with waterproof features design it provides protection against harsh conditions. The standard platinum sensor provides fast and reliable measuring results. Total dissolved solid content present in drinking water, waste water, swimming pool & aquarium water can be measured using pocket TDS meter.
CatalogSpecifications
TDS range | 0.5 - 100.0 ppm |
---|---|
TDS accuracy | ± 1 % F.S. |
TDS factor | 0.4 to 1.0 (default 0.5) |
Calibration points | 1 point |
TDS type range | Low range TDS |
Calibration solutions | 71.8 ppm |
Type of sensor | Platinum sensor |
Temperature compensation | 0 °C - 50 °C, Automatic |
Temperature coefficient | 2 % per °C |
Normalization temperature | 25 °C |
Operating temperature | 0 °C - 60 °C, 32 °F - 140 °F |
Connector | 6 pin |
Display | LCD screen |
Data hold function | Manual |
Battery life | Approximately 150 hours |
Power off | Manual or automatic (8 minutes after last key is pressed) |
Power | 3 × 1.5 V “G13A” |
Dimension (L × dia.) | 185 × 40 mm |
Weight | 100 g |
Features
Applications
Pocket TDS tester is used to measure TDS content in waste water, swimming pool & aquarium, pure water, drinking water. It is also used in educational and other industrial applications for TDS measurement from test samples.
Standard Accessories
G134 button cell batteries
Carrying box
TDS standard solution (71.8 ppm)
Optional Accessories
71.8 ppm TDS standard solutions
Platinum conductivity electrode