Pocket Dissolved oxygen tester LPKDO-A10 is equipped with polarographic sensor to measure dissolved oxygen content. The system menu of dissolved oxygen meter can set 6 parameters which includes the number of calibration points, temperature units etc. It can measure the dissolved oxygen content present in water, waste water, other liquids & solutions.
Catalog| Dissolved oxygen range | 0.0 to 20.0 mg/L (or ppm) |
|---|---|
| Dissolved oxygen accuracy | ± 0.5 mg/L |
| % of saturation of oxygen | 0.0 to 200.0% |
| Sensor type | Polarographic dissolved oxygen probe |
| % Saturation of oxygen accuracy | ± 10 % F.S. |
| Temperature compensation range | 0 °C to 40 °C, 32 °F to 104 °F |
| Barometric pressure correction | 60.0 to 112.5 kPa, 450 to 850 mmHg |
| Salinity correction | 0 - 35 g/L |
| Data hold function | Manual or automatic |
| Power off | Manual or automatic (8 minute after last key is pressed) |
| Reset function | Yes |
| Connector | 6 pin mini plug |
| Battery life | Approximately 150 hours |
| Dimension (L × Dia.) | 175 × 40 mm |
| Weight | 100 g |
Pocket Dissolved oxygen tester has applications in water & waste water management industry, aquarium, surface ground water, etc. to detect content of dissolved oxygen.
Dissolved oxygen probe
Dissolved oxygen Electrolyte solution
Membrane cap
AAA batteries
Carrying case
Polarographic sensor
30 ml electrolyte solution per bottle
Membrane cap
Labtron Equipment Ltd. enables the customer success through innovation, cGMP manufacturing, comprehensive service offerings, ecological and corporate sustainability.
