Portable Dissolved oxygen meter LPRDO-A10 is equipped with polarographic sensor to measure the dissolved oxygen content. The manual salinity & barometric pressure compensation helps in accurate measurement of dissolved oxygen. It can store up to 48 sets of data & it is transferrable to PC via USB interface. Due to its portable nature this meter can be used across water purification plants, waste water management plants for testing & quality analysis.
Catalog| Dissolved oxygen range | 0.0 to 20.0 mg / L (or ppm) |
|---|---|
| Dissolved oxygen accuracy | ± 0.5 mg / L |
| Resolution | 0.1 mg / L |
| Calibration points | 1 - 2 points |
| Sensor type | Polarographic DO probe |
| Temperature compensation range | 0 to 40 °C, 32 °F to 104 °F |
| Barometric pressure correction | 60.0 to 112.5 kPa, 450 to 850 mmHg |
| Salinity correction | 0 - 35 g / L |
| % of saturation of oxygen range | 0.0 to 200.0 % |
| % of saturation of oxygen accuracy | ± 10 % F.S. |
| % of saturation of oxygen resolution | 0.001 |
| Data hold function | Manual |
| Reset function | Yes |
| Memory | Stores up to 48 sets of data |
| Output | USB communication interface |
| Display | LCD screen |
| Connector | 4-pin mini plug |
| Battery life | Approximately 150 hours |
| Power | 1 x 9 V / 800 mA battery |
| Dimension (L x W x H) | 185 × 88 × 32 mm |
| Weight | 300 g |
Portable dissolved oxygen meter has applications in water & waste water management industry, environmental monitoring, surface ground water, research & development, education to detect content of dissolved oxygen.
Dissolved oxygen probe
Dissolved oxygen Electrolyte solution
Membrane cap
1 x 9 V/ 800 mA battery
Carrying case
Polarographic sensor
30 mL electrolyte solution per bottle
Membrane cap
Labtron Equipment Ltd. enables the customer success through innovation, cGMP manufacturing, comprehensive service offerings, ecological and corporate sustainability.
