Sample Concentrator LSCO-A10 accelerates the concentration of samples by blowing nitrogen gas at the rate of 15 L/min. It comes with a microprocessor controller which controls the temperature of high-purity aluminium when the equipment is in operation. The models have provisions of concentrating around 3 to 24 samples at a time.
Catalog| Number of samples | 3 to 24 wells |
|---|---|
| Nitrogen Flow Rate | 15 L/min |
| Nitrogen Pressure | 0.02 MPa (Gas needle ≤ 16pcs) 0.05MPa (Gas needle > 16pcs) |
| Block Quantity | 1 |
| Temperature Control Range | Room temp. +5 ℃ to 160 ℃ |
| Needle length | 150 mm |
| Temp. uniformity | ≤ ± 0.5 ℃ |
| Temp. accuracy | ±0.5 ℃ (at 40 ℃) ± 1 ℃ (at 120 ℃) |
| Display accuracy | 0.1 ℃ |
| Heating time | ≤ 15 min (from 25 ℃ to 160 ℃) |
| Timing range | 1 min - 99 h 59 min |
| Voltage | AC 220 V or AC 110 V, 50 / 60 Hz |
| Power Consumption | 300 W |
| Dimension | 260 x 220 x 450 mm |
| Weight | 7 kg |
Sample Concentrator is used for sample preparation, drug screening, hormone assays, chromatographic analysis and scintillation counting.
| Block no. | Diameter of tubes | Capacity |
| SCB-01 | 10 mm | 24 |
| SCB-02 | 12 mm | 24 |
| SCB-03 | 13 mm | 24 |
| SCB-04 | 15 mm | 16 |
| SCB-05 | 16 mm | 16 |
| SCB-06 | 19 mm | 12 |
| SCB-07 | 20 mm | 12 |
| SCB-08 | 26 mm | 8 |
| SCB-09 | 28 mm | 4 |
| SCB-10 | 40 mm | 3 |
| SCB-11 | 1.5 ml (centrifuge tube) | 24 |
| SCB-12 | 2.0 ml (centrifuge tube) | 24 |
Labtron Equipment Ltd. enables the customer success through innovation, cGMP manufacturing, comprehensive service offerings, ecological and corporate sustainability.
