info@labtron.us
Labtron
Request Quote

Plastic Testing Instruments

Aging Oven TAO-A10

  • The maximum temperature : 300°C
  • Temperature fluctuation : Within ± 0.5°C
  • Temperature uniformity : Within ± 1°C
  • Rotate speed of the turntable : 11 r/min to 12r/min, turntable dimension diameter: 285 mm
  • Quantity of heaters : 2 pcs

Charpy/ Izod Impact Tester TCI-A10

  • Impact Speed & Energy (charpy) : 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
  • Impact energy (Izod) : 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
  • Resolution of impact energy : 0.001 J
  • Pendulum up angle : 160°
  • Impact center distance (Charpy) : 221 mm for 1J, 2J, 4J, 5J & 380 mm 7.5J, 15J, 25J

Falling Weight Impact Tester TFWT-A10

  • Temperature range : 10 to 35°C
  • Maximum falling height : 2000 mm
  • Resolution of displacement : 1 mm
  • Height error : < ± 2 mm
  • Hammer mass : 0.25 to 16 kg
Heat sealer THS-A10
  • Seal temperature : Room temperature -250°C
  • Control accuracy : ± 0.2°C
  • Dwell time : 0.1 S to 999.9 S
  • Dwell pressure : 0.05 to 0.7 MPa
  • Heating mode : Single and double heating surface
Lasting adhesive tester TLAT-A10
  • Standard roller : 2000 ± 50 g
  • Testing stations : 3
  • Dimension (L*W*H) tester : 320×210×550 mm (3 stations)
  • Weight for stations : 10 kg (3 stations)
  • Weight of the plates : 1000 ± 3 g ( with triangle hook)

Lasting adhesive tester TLAT-A11

  • Standard roller : 2000 ± 50 g
  • Testing stations : 6
  • Dimension (L*W*H) tester : 650×210×550 mm (6 stations)
  • Weight for stations : 15 kg (6 stations)
  • Weight of the plates : 1000 ± 3 g ( with triangle hook)