Enquiry Form

Water Purification System LWPS-A10

Water Purification System LWPS-A10

Water Purification System LWPS-A10 is a Type I water treatment system and the feed water is RO or distilled water. It mainly consists of pretreatment system, RO system, ultrapure water system conveying unit and control system. It consists of 254 nm UV lamp to remove the bacteria in the system and 185nm UV lamp to reduce TOC. Fully automatic control over the whole process, e.g. automatic water preparation, when water tank is full, automatically stop the system and cut off the power and water. Built-in RO membrane timing automatic flush procedures, and manual RO membrane cleaning button is available.



Water quality One stage (Type I)
Feed water RO water /Distilled water
Water temperature: 5 ~ 40℃
Resistivity 18.25 MΩ.cm @ 25 ℃
TOC < 5ppb
Bacteria < 0.1 cfu/ml
Endotoxin < 0.001 EU/ml
Particle ( > 0.22μm) <1/ml
Absorbance (254nm,1cm optical distance) < 0.001 EU/ml
Reactive Silica(SiO2) < 0.01 ppm
RNases < 0.01 ng/ml
DNases < 4 pg/μl
Temperature 5 ℃ ~ 40 ℃
Humidity 10 % ~ 80 %
Water production rate Type 1 water flow rate: 1-1.5 L/min
Micro filtration Millipore Millipak 0.22μm membrane or hollowed fiber membrane filter
Power supply 230 V/50 Hz 150 W
Main body Dimension (L × W × H) 340 × 550 × 530 mm (bench type)



Used for Medical device injection to human body, DNA/RHA preparation, DNA testing, HPLC (test and analysis of amino acid, penicillin; Organic ingredients), GCMS, ICP, IC, gas chromatography, AAS etc.

Flow Schematic

RO pure water →Pure water tank→ Pure water conveying pump→ UV lamp→ Ultra-purification package→ Ultra-purification cartridge→ UF filter → Micro-filter→ Type I ultrapure water outlet

Related Models

Products you may like