Specifications

Interior Volume	100 L
Heat load	1000 W
Temperature Range	0℃ to 100 ℃
Temperature Deviation in time	± 2.0 ℃
Temperature Fluctuation	± 0.5 ℃
Humidity Range	20% to 98% RH
Humidity Deviation in time	± 2.5% RH
Cooling Rate	1 ℃ / min
Heating Rate	3 ℃ / min
Cooling system	Mechanical compression refrigeration system
Refrigerating unit	French TECUMSEH compressor
Refrigerant	R404A, R23
Heating Element	Nichrome heater
Controller	Programmable color LCD touch screen controller Ethernet connection, PC Link
Water supply system	Automatic water supply Water purification system
Humidifier	External isolation, stainless steel surface evaporation humidifier
Dehumidification	Evaporator
Temperature Sensor	PTR Platinum Resistance PT100 Ω/MV A-class, accuracy 0.001℃
Humidity Sensor	Dry and wet bulb sensor
Build-in Water Tank	270 × 300 × 400 mm
View Window Size	250 × 280 mm
Air Circulation	Centrifugal wind fan
Exterior Material	Steel Plate with protective coating
Interior Material	SUS304 stainless steel
Thermal Insulation	Polyurethane foam and insulation cotton
Observation Window	Interior lighting, double-layer thermo stability silicone rubber sealing
Standard Configuration	1 Cable hole (Φ 50,) with plug; 2 shelves
Maximum Noise	65 dBA
Ambient Temperature	5℃ to +35 ℃
Relative Humidity	≤ 85% RH
Internal dimension	400 × 500 × 500 mm
External dimension	860 × 1050 × 1620 mm
Power Supply	220 V, 50 Hz / 380 V, 50 Hz
Net weight	290 kg
Gross weight	340 kg

Features

Designed with PID controller system to control main unit, temperature system and Display
Double layer insulating glass 8 cm thick, made of tempered glass
Internal material designed with mirror surface finishing, 304 stainless steel which is rust proof, corrosion resistance
Heat load can absorb 1000 W in -20℃
Built-in LED light for the working room light which clearly observe samples
The filter element is suggested to be replaced once a year
Water re-circulation system consisting of water purifier which purifies sourced water to water tank, reduces water use and series of pipes
Designed with PT-100 sensor, real time accurate detection and display of temperature
Wet gauze and a real-time temperature, converted by temperature difference, show real-time relative humidity
LCD display, which can display test conditions
Equipped with automatic humidification, which automatically heated by the humidification tank
High and low temperature corrosion resistance external material is made up of A3 steel plate with galvanized coating
Provides protection against over temperature, water shortage, over current, earth leakage, phase sequence, humidifier dry combustion, and refrigerant high pressure
10 cm thick polyurethane foam and insulation cotton provides better insulation
Standard test Cable hole 50 mm inner diameter, located at left side of work room, is provided with sieve inside to prevent moisture from entering the room
SUS304 stainless steel shelves, standard configuration 2 pcs (removable, adjustable height), 50 kg sample load of each shelf
4 movable castors for ease moving, and with brakes function

Applications

Drug Stability Test Chamber is used in food industry also basic used in advanced research, Pharmaceutical Drug stability testing point, chemical industries, and including testing products relating to aerospace, electronics, automobile and environmental stress screening etc.

Labtron Equipment Ltd. enables the customer success through innovation, cGMP manufacturing, comprehensive service offerings, ecological and corporate sustainability.

Popular Category

Quick Links

Social Media

Drug Stability Test Chamber LDST-A20

Ozone Test Chamber

Plant Growth Chamber

Salt Spray Test Chamber

Sand Test Chamber

Temperature and Humidity Test Chamber

UV Test Chamber