Enquiry Form

Temperature and Humidity Test Chamber LTHC-C10

Temperature and Humidity Test Chamber LTHC-C10

Temperature and Humidity Test Chamber LTHC-C10 designed with 700 L internal capacity volume. It offers 20 to 98 % RH humidity Range and temperature ranges from 10℃ to 50℃. Designed to simulate constant climatic conditions for testing a wide variety of products for their quality, performance, shelf life and stability. It features conductive film located on the interior glass (of double layer 8 cm thick insulation glass) to prevent window frosting, built-in LED light for the work room lighting to clearly observe samples. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field.



Interior Volume 700 L
Heat load 1000 W
Temperature Range 10℃ to +50 ℃
Temperature Deviation in time ± 0.1 to 0.3 ℃
Temperature Deviation in space ± 0.5 to 1.0 ℃
Humidity Range 20 to 98 % RH
Humidity Deviation in time ± 1% RH
Cooling Rate 1 ℃ /min
Heating Rate 3 ℃ / min
Cooling system Mechanical compression refrigeration system
Refrigerating unit French TECUMSEH compressor
Refrigerant R404A, R23
Heating Element Nichrome heater
Controller Programmable color LCD touch screen controller Ethernet connection, PC Link
Water supply system Automatic water supply, (water purification system)
Humidifier External isolation, stainless steel surface evaporation humidifier
Dehumidification Evaporator
Temperature Sensor PTR Platinum Resistance PT100Ω/MV A-class, accuracy 0.001℃
Humidity Sensor Dry and wet bulb sensor
Build-in Water Tank 270 × 300 × 450 mm
View Window Size 330 × 370 mm
Air Circulation Centrifugal wind fan
Exterior Material Steel Plate with protective coating
Interior Material SUS304 stainless steel
Thermal Insulation Polyurethane foam and insulation cotton
Observation Window Interior lighting, double-layer thermo stability silicone rubber sealing
Standard Configuration 1 Cable hole (Φ 50,) with plug; 2 shelves
Maximum Noise 65 dBA
Ambient Temperature 5℃ to 35 ℃
Relative Humidity ≤85% RH
Internal Dimension 700 × 1000 × 1000 mm
External dimension 1180 × 1550 × 2110 mm
Power Supply 220V 50Hz / 380V 50 Hz



Test Chamber is used in food industry also basic used in advanced research, pharmaceutical industries, chemical industries, and including testing products relating to aerospace, electronics, automobile and environmental stress screening etc.

Related Models

Products you may like